{"product_id":"ti5-cra-ri80-110-lightweight-joint-module","title":"Ti5 CRA-RI80-110 Lightweight Joint Module","description":"\u003cp\u003eThe CRA-RI80-110 is the larger-framed of the two Ti5 80-series joints. It has the same five-ratio torque table as the CRA-RI80-97 — 121 N·m peak at the 51 ratio up to 217 N·m at 161, with peak speed falling from 65 RPM to 22 RPM — in a heavier housing: 2.06 kg for the base build against 1.5 kg.\u003c\/p\u003e\u003cp\u003eThe second difference is electrical. Both modules are rated at 750 W from a 24–48 V supply with a 0.143 N·m\/A torque constant, but maximum continuous current here is 10.4 A with 9 A rated, against 11.1 A and 9.6 A on the lighter frame. Everything else in the two tables agrees, including the 27 mm bore, the 85.5 mm and 105.5 mm housing lengths and the rotor inertias, so the frames are separated by mass and current headroom rather than by output. Which of the two suits a given mounting and duty cycle is confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eThree builds are fully specified. The base CRA-RI80-110-PRO-2-XXX is 85.5 mm at 2.06 kg with a 16-bit encoder on CAN and 1,477.6 g·cm² rotor inertia. The -B build extends to 105.5 mm at 2.26 kg and 1,761.1 g·cm². The -2E-EC build keeps the 85.5 mm length at 2.05 kg and adds a 16\/18-bit encoder option with EtherCAT alongside CAN. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eBoth 80-frame modules sit between the 70-frame, which stops at 108 N·m, and the 100-frame, which starts at 267 N·m, so this is the joint for a base or hip axis on a machine that does not need the largest frames. It is an integration part: the links, controller, power distribution and software are the integrator's.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame 80-frame torque table, heavier housing:\u003c\/strong\u003e The five-ratio torque and speed figures, the 750 W rating, the 27 mm bore, the housing lengths and the rotor inertias match the CRA-RI80-97's tables; base build mass is 2.06 kg against 1.5 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e217 N·m peak at the top ratio:\u003c\/strong\u003e 51:1 gives 121 N·m peak at up to 65 RPM, 81:1 gives 169 N·m at 43 RPM, and 101:1, 121:1 and 161:1 give 194, 207 and 217 N·m at 36, 30 and 22 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e133 N·m allowable at average load:\u003c\/strong\u003e The three higher ratios are rated for 133 N·m at average load and 84 N·m at a 2000 RPM input speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750 W electrical platform:\u003c\/strong\u003e All builds run from 24–48 V at 9 A rated and 10.4 A maximum continuous current, with a 0.143 N·m\/A torque constant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e27 mm hollow shaft:\u003c\/strong\u003e The wide bore lets power and signal cabling for the axes beyond this joint run through its centre rather than around the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree fully specified builds:\u003c\/strong\u003e 85.5 mm at 2.06 kg for the base unit, 105.5 mm at 2.26 kg for the extended -B body, and 85.5 mm at 2.05 kg for the -2E-EC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFourth build confirmed at quote:\u003c\/strong\u003e The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Ti5 Robotics","offers":[{"title":"Default Title","offer_id":67847207518498,"sku":"Ti5-Robotics-Joint-Module-80-110","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/ti5-robotics-joint-module-80-110-1.png?v=1794972752","url":"https:\/\/robotixmarket.pt\/en\/products\/ti5-cra-ri80-110-lightweight-joint-module","provider":"Robotix Market Europe","version":"1.0","type":"link"}