{"product_id":"ti5-cra-ri60-70-lightweight-joint-module","title":"Ti5 CRA-RI60-70 Lightweight Joint Module","description":"\u003cp\u003eThe CRA-RI60-70 is the step above the Ti5 50-frame modules and the first in the line to offer four gear ratios: 42 N·m peak torque at 51:1 rising to 66 N·m at 101:1 and 121:1, with peak speed falling from 82 RPM to 32 RPM across that span. Bore grows to 18 mm and the platform rating to 300 W, roughly double the 50-frame's torque in a housing of similar length.\u003c\/p\u003e\u003cp\u003eIt is the lighter of the two 60-frame modules. The CRA-RI60-70 and the CRA-RI60-80 share the same four ratios, the same torque and speed table, the same 300 W platform at 24–48 V with 5 A rated and 6.7 A maximum continuous current, the same 0.096 N·m\/A torque constant and the same 18 mm bore. Mass is where they part: 0.73 kg here against 1.03 kg, 0.88 kg against 1.2 kg for the extended body, 0.76 kg against 1.04 kg for the EtherCAT build. Their performance figures are identical, so the choice between the two frames is a mechanical-envelope and moving-mass decision and is confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eThree builds are fully specified. The base CRA-RI60-70-PRO-2-XXX is 72.5 mm long at 0.73 kg with a 16-bit encoder on CAN. The -B build extends the housing to 93 mm at 0.88 kg with higher rotor inertia. The -2E-EC build is 74 mm at 0.76 kg and adds a 16\/18-bit encoder option with EtherCAT alongside CAN, which is the build to specify when several axes have to run on one deterministic control loop. A fourth designation, -B-2E-EC, completes the family, and its figures are confirmed with the quotation.\u003c\/p\u003e\u003cp\u003eThe module is a building block rather than a finished product: a complete joint — motor, gearing, encoder and drive electronics in one housing with a bus interface — for humanoid limbs, lightweight manipulator axes and multi-axis prototypes. The links, controller, power distribution and software around it are the integrator's work.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e42 to 66 N·m across four ratios:\u003c\/strong\u003e 51:1 gives 42 N·m peak at up to 82 RPM, 81:1 gives 53 N·m at 51 RPM, and 101:1 and 121:1 both give 66 N·m at 41 and 32 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe lighter of the two 60-frame modules:\u003c\/strong\u003e Base build mass is 0.73 kg against 1.03 kg for the CRA-RI60-80, on identical torque, speed and electrical ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 arcsec backlash on the top two ratios:\u003c\/strong\u003e Gear backlash is 20 arcsec at 51:1 and 81:1 and tightens to 10 arcsec at 101:1 and 121:1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 W electrical platform:\u003c\/strong\u003e All builds run from 24–48 V at 5 A rated and 6.7 A maximum continuous current, with a 0.096 N·m\/A torque constant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 mm hollow shaft:\u003c\/strong\u003e Cabling passes through the joint axis instead of around it, which keeps harnesses inside a serial arm or limb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree fully specified builds:\u003c\/strong\u003e 72.5 mm at 0.73 kg for the base unit, 93 mm at 0.88 kg for the extended -B body, and 74 mm at 0.76 kg for the -2E-EC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEtherCAT on the -2E-EC build:\u003c\/strong\u003e That build adds a 16\/18-bit encoder option and EtherCAT alongside CAN, where the base and -B builds are CAN with a 16-bit encoder.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Ti5 Robotics","offers":[{"title":"Default Title","offer_id":67847207223586,"sku":"Ti5-Robotics-Joint-Module-60-70","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/ti5-robotics-joint-module-60-70-1.png?v=1794972752","url":"https:\/\/robotixmarket.pt\/en\/products\/ti5-cra-ri60-70-lightweight-joint-module","provider":"Robotix Market Europe","version":"1.0","type":"link"}